The foil cutter FS grinds edge trims and chips of different materials, which can be extracted by suction. It is designed for the installation directly into the piping.
The FS grinds:
- paper and cardboard
- plastic
- textiles
- glass fibre fleece
- soft materials (aluminium, lead, etc.)
The solid cast housing and the double-sided bearing of the rotor ensure a very precise cutting gap.
The foil cutters are used successfully on production lines from
20 to 1.000 m/min.
The drive motor can be adapted to the respective line speed by a frequency converter.
Different rotor versions extend the range of application to the grinding of chips.
Describe us your application. We will be pleased to assist you.
For special applications we will test your material in our technical center.
Technical specifications
| Model | FS 200 | FS 300 |
|---|---|---|
| Rotor cutting diameter [mm] | 200 | 300 |
| Inlet opening [mm] | 205 x 160 | 256 x 230 |
| No. of rotary blades | 2 | 2 |
| No. of stationary blades | 1 | 1 |
| Motor power [kW] | 2,2 – 3,0 | 3,0 – 5,5 |
| Airflow rate [m³/hr] | 4.000 | 6.000 |
Picture gallery
